cast bronze plaques rosette ADA Signage cast bronze plaques rosette

Cast Bronze Plaques spacer

Mounting Methods

A variety of standard mounting methods are available on cast ADA signs to suit virtually any installation.

Drill and tap

Drill and Tap

All standard cast ADA signs are 1/4" deep, flat backed. For permanent, concealed mounting, these plaques are drilled and tapped and provided with threaded studs.
Doouble faced tape

Double Faced Tape

...may be specified for use on cast ADA signs. It is highly recommended that an adhesive (such as silicone or construction adhesive) be used between the strips of tape for additional installation security.
Drill through face

Drill Through Face

Holes are drilled through the face of the cast ADA sign in each of the four corners. Depending upon the type of mounting surface, wood screws, toggle bolts or machine screws and expansion sleeves may be specified.

<< Back to ADA Signs