cast bronze plaques rosette Etched Metal Plaques cast bronze plaques rosette

Cast Bronze Plaques spacer

Mounting Methods

Mount with double faced tape

Double Faced Tape

...is provided upon request. Due to the many varieties of adhesives and wall surfaces, as well as the weight of the etched plaque, testing is recommended before specifying double faced tape on etchings.
Stud mount

Stud Mount I

Threaed studs are recommended for concealed mounting to solid walls. Bonding cement or silicone adhesive secures the studs within the drilled holes. Standard length for threaded studs is 1-1/2". Custom lengths are available.
Stud mount

Stud Mount II

If the etched plaque is 1/4" or thicker, the back of the etching is drilled and tapped. If the plaque is less than 1/4" thick, studs are spot welded on the back. Studs not recommended on material 1/16" thick or less due to "dimpling" on the etching face.
Silicone mounted etched plaque

Silicone Mount

Silicone adhesive may be provided if specified for etched plaques. This is an effective mounting method for etched plaques, although is best when combined with double-faced tape.
Holes through the etched plaque face

Holes Through Face

Any etched plaque can be provided with holes through the face for mechanical fasteners if requested. Please specify type or fastener, location and size of holes, and whether or not the holes must be countersunk. Hardware can be provided upon request. Specify screw type, material size, length, head style, and finish.

<< Back to Etched Metal Plaques